Things To Consider When Installing A Laundry Chute
You have just moved to your new house. Still, it is not your dream house as you cannot call it livable. You need to trans 1form your house into a comfortable and efficient one. This transformation also includes the installation of a laundry chute from your bedroom to the basement. Laundry chutes are very common in modern houses. You don’t have to climb up and down stairs multiple times to deal with laundry affairs. So, let’s help you by putting a laundry chute in.
How to Install a Laundry Chute
Installing a laundry chute in your house is not an easy task. You need to buy laundry chute door parts, tools and other supplies. Most importantly, you need an X-ray of the place. When you have a blueprint of the place, you may be able to find a course through the frame of your house and mechanicals. You want a straight drop from the laundry chute discharge door to the washer in your basement. This becomes more difficult when you have remodeled your house. You will have to make some sacrifices.
Try to have a direct chute. However, if it involves curves, make sure that they are gradual and big. To make sure that your clothes pass smoothly, use a chain made of sheet metal, drywall, melamine or wood and all the joints are well sealed. If you are using plywood, use high-gloss paint to coat its inside. Plywood chase is silky to touch. Rub paste wax inside to prevent the grain from raising due to damp towels.
Placing a Laundry Chute Door
The design of the laundry chute depends on your house. If you have kids in your house, the laundry chute discharge door must be elevated. Learn about state building codes. The design, size and placement of laundry chute doors are regulated. Fire may travel up a chute. Therefore, you must use trapdoors. Instead of relying on the internet to find local building codes, visit the local building authorities to get the latest information as regulations are often amended.
Building the Chase
Here comes the trickiest part. What if you have no blueprints? You may not be able to find a clear route. Your chute may collide with a water pipe, outlet wires, a drain pipe or thermostat wire. In such cases, you need a design built-laundry chute. You need to build a chase that avoids pipes and wires.
You need the following supplies for laundry chute door installation:
- Duct tape
- Drywall tape
- Metal duct
- Laundry chute door
- Metal-cutting snips
- Drywall saw
- Sheet metal screws
- Tape measure
- Stud finder
- Two pieces of wood (2-by-4)
- Utility knife
You can find an online supplier for laundry chute door parts. Laundry chute installation can be your next do-it-yourself project. However, keep in mind that it is not an easy task. Install a chute on your own when you know how to properly install one. If you have no idea, find an experienced professional to do it for you.