Which Parts Get Reviewed in an MOT Exam of Your Vehicle?
An MOT test is a yearly check mandatory by law for all kinds of vehicles in the UK that are more than three years of age. The test adheres to the strict standards set by the DVSA to decide if an automobile is safe to drive on roads for you and other on-road cars plus passengers. The MOT includes a wide range of checks performed by a DVSA-approved test centre including lights, seat belts, exhaust and more. Below you can find a complete list of all the checks conducted in an MOT that should be in the best possible conditions for you to pass the test hassle-free. Moreover, always book your test at an authorised test centre that is marked by a three white triangle sign to ensure they have the required tools, tech and skilled technicians who can perform a fair and accurate check.
Different Components That Get Inspected In The MOT Test
Ensure you have maintained the parts mentioned below to pass you MOT Peterborough without much difficulty.
Bodywork, structure and other items
Bodywork
The vehicle’s bodywork, engine mounts, seats, chassis, bonnet, doors and boot should not have signs of excessive corrosion plus sharp edges that may result in injuries.
Registration plates
All cars should have a front and rear registration plate on them that should be fixed securely and should not be damaged in any way. Moreover, both the registration plates should be easily readable from about 20 metres away.
Clean: Ensure you don’t go to a test centre with a car covered with mud or dirt. Give the vehicle a thorough cleaning from inside as well as outside to ensure there are no issues in the MOT.
Vehicle Indication Number (VIN)
VIN or Vehicle Indication Number is generally found at the doors of a vehicle. If you open the doors, you can see the VIN. The plate should be easily readable and firmly secured. Moreover, VIN can also be found etched near the chassis or body.
Speedometer
All vehicles should have a speedometer with no issues when driving. Moreover, the MOT tester will also check if the speedometer is visible in the dark. The MOT tester will review the speedometer to determine if it is readable plus damage-free.
Car Owners View Of The roadway
Believe it or not, vehicles can fail the MOT due to issues with the windscreen, wipers or mirror.
Windscreen
The MOT tester will review the windscreen and look for any signs of chips or cracks. Any chips or cracks made on the driver’s view that are larger than 10mm will lead to MOT failure. Moreover, apart from the view of the driver, the area that gets cleaned by the wiper blades should not have any kind of damage more than 40mm.
Wipers plus mirrors
Car owners should inspect the wipers blades plus rearview mirrors before heading to the test centre. The wipers on your vehicle should have an adequate amount of rubber to leave the windscreen smear-free. Moreover, the rearview mirrors must be secure, not damaged and should give the car driver a nice view of the back and side-to-side.
Tyres and Wheels.
For an automobile to be qualified to operate on roads, the tyres installed should be in a good state. Also, the speed plus load rating should match the automobile you drive, and there should be no deep cuts and bulges. Also, ensure the tyre tread depth is at least 1.6mm, and anything lower than that will lead to you failing the MOT.
Wheels
The wheels of your vehicle have to be accurately aligned, balanced plus firmly mounted. Furthermore, the lug nuts should not be difficult to lock or unlock and have no signs of significant damage.
Brakes
A brake inspection is conducted in the annual Car Tyres Peterborough test to decide whether an automobile is fit to drive or not. Also, the brake levers plus the brake pedal have to be operating well when driving and should be in good condition.
Seat belts
Many automobile owners ignore the state of the seat belts when going for the MOT test. All the seat belts installed in your car have to be in a good condition and should meet the required safety standards.
Other Parts Inspected In an MOT
- Lights and other electrical equipment
- Horn
- Battery
- Electrical wiring
- Steering and Suspension
- Exhaust, Fuel and Emissions
Contact a tyre service provider today if you want more information about MOT Peterborough.
Which Parts Get Reviewed in an MOT exam of your vehicle?
An MOT test is a yearly check mandatory by law for all kinds of vehicles in the UK that are more than three years of age. The test adheres to the strict standards set by the DVSA to decide if an automobile is safe to drive on roads for you and other on-road cars plus passengers. The MOT includes a wide range of checks performed by a DVSA-approved test centre including lights, seat belts, exhaust and more. Below you can find a complete list of all the checks conducted in an MOT that should be in the best possible conditions for you to pass the test hassle-free. Moreover, always book your test at an authorised test centre that is marked by a three white triangle sign to ensure they have the required tools, tech and skilled technicians who can perform a fair and accurate check.
Different Components That Get Inspected In The MOT Test
Ensure you have maintained the parts mentioned below to pass you MOT Peterborough without much difficulty.
Bodywork, structure and other items
Bodywork
The vehicle’s bodywork, engine mounts, seats, chassis, bonnet, doors and boot should not have signs of excessive corrosion plus sharp edges that may result in injuries.
Registration plates
All cars should have a front and rear registration plate on them that should be fixed securely and should not be damaged in any way. Moreover, both the registration plates should be easily readable from about 20 metres away.
Clean: Ensure you don’t go to a test centre with a car covered with mud or dirt. Give the vehicle a thorough cleaning from inside as well as outside to ensure there are no issues in the MOT.
Vehicle Indication Number (VIN)
VIN or Vehicle Indication Number is generally found at the doors of a vehicle. If you open the doors, you can see the VIN. The plate should be easily readable and firmly secured. Moreover, VIN can also be found etched near the chassis or body.
Speedometer
All vehicles should have a speedometer with no issues when driving. Moreover, the MOT tester will also check if the speedometer is visible in the dark. The MOT tester will review the speedometer to determine if it is readable plus damage-free.
Car Owners View Of The roadway
Believe it or not, vehicles can fail the MOT due to issues with the windscreen, wipers or mirror.
Windscreen
The MOT tester will review the windscreen and look for any signs of chips or cracks. Any chips or cracks made on the driver’s view that are larger than 10mm will lead to MOT failure. Moreover, apart from the view of the driver, the area that gets cleaned by the wiper blades should not have any kind of damage more than 40mm.
Wipers plus mirrors
Car owners should inspect the wipers blades plus rearview mirrors before heading to the test centre. The wipers on your vehicle should have an adequate amount of rubber to leave the windscreen smear-free. Moreover, the rearview mirrors must be secure, not damaged and should give the car driver a nice view of the back and side-to-side.
Tyres and Wheels.
Tyres
Tyres play a key role in determining if you will pass the MOT or not.
For an automobile to be qualified to operate on roads, the tyres installed should be in a good state. Also, the speed plus load rating should match the automobile you drive, and there should be no deep cuts and bulges. Also, ensure the tyre tread depth is at least 1.6mm, and anything lower than that will lead to you failing the MOT.
Wheels
The wheels of your vehicle have to be accurately aligned, balanced plus firmly mounted. Furthermore, the lug nuts should not be difficult to lock or unlock and have no signs of significant damage.
Brakes
A brake inspection is conducted in the annual MOT test to decide whether an automobile is fit to drive or not. Also, the brake levers plus the brake pedal have to be operating well when driving and should be in good condition.
Seat belts
Many automobile owners ignore the state of the seat belts when going for the MOT test. All the seat belts installed in your car have to be in a good condition and should meet the required safety standards.
Other Parts Inspected In an MOT
- Lights and other electrical equipment
- Horn
- Battery
- Electrical wiring
- Steering and Suspension
- Exhaust, Fuel and Emissions
Contact a tyre service provider today if you want more information about MOT Peterborough.
